Remote Flange Type Corrosive Water Magnetic Flowmeter Electromagnetic Flow Meter

Product Description

Product Description

Electromagnetic Flow meter
Nominal diameter 3-3000mm
Velocity range 0-10m/s
Degree of accuracy ±0.5%R,±1%R
Medium conductivity ≥5uS/cm, Actual conductivity≥20uS/cm
Nominal pressure(hight press 0.6MPa 1.0Mpa 1.6MPa 2.5MPa 4.0MPa
DN700-DN3000 DN200-1000 DN15-DN600 DN15-DN150 DN15-DN150
Ambient TemperatureRanges fission-10~+60º
Lining Material:  Chloroprene rubber (CR),80ºC
                            Polytetrafluoroethylene(PTFE/F4),120ºC
                            Fluorinated ethylene propylene (FEP/F46),140ºC; PFA,180ºC
                            Polyurethane(PU),80ºC
Electrode Material: 316L Stainless Steel, Hastelloy B/ C , Ti, Ta, Pt
Output signal: Current (4-20mA), pulse,  frequency Serial
Communications: RS-485, support standard Mudbus protocol; GPRS, HART
Flange standard: GB.ANSI150, DIN
Power supply: 220VAC/24VDC/Lithium battery
Protection class IP65/IP67/IP68

Product Parameters

 

Measuring Medium	Liquid (single-phase medium or can be considered as a single-phase medium)
	When the dryness of saturated steam is ≥85%, it can be considered as a single-phase medium
Medium Temperature	-40ºC~+200ºC
Medium Pressure	1.6Mpa; 2.5Mpa; 4.0Mpa (Other pressure can be customized)
Accuracy	1.0%(flange); 1.5% (insertion)
Measuring range Ratio	1:10(Standard air condition as reference) 1:15(Liquid)
Velocity Range	Liquid: (0.4~7)m/s; Gas: (4.0~60)m/s; Steam: (5.0~70)m/s
Pipe Diameter Range	DN15-DN300(Flange), DN80-DN2000(Insertion), DN15-DN100(Thread), DN15-DN300(Wafer), DN15-DN100(Sanitary)
Material	SS304(Standard), SS316(Optional)
Pressure Loss Coefficient	Cd≤ 2.6
Vibration Acceleration Allowed	≤0.2g
Power Supply	DC24V or 3.6V battery power
Protection Class	IP65
IEP /ATEX	II 1G / Ex ia IIC T5 Ga
Environmental Conditions	Ambient temperature: -40ºC~55ºC
	Relative humidity: ≤85%
	Atmospheric pressure:(86~106) KPa
Output Signal	Pulse frequency signal2-3000Hz, Low level≤1V, high level≥6V
	Two-wire system 4~20mA signal(isolated output), Load≤500

Packaging & Shipping

 

Company Profile

Kaifeng ChuangXin Measurement and Control Instrument Co., Ltd. Was established in 2009, and is a professional company occupied in instruments R & D, manufacturer, sales and technical counsel. The main products are Electromagnetic Flowmeter, Vortex Flowmeter, Turbine Flowmeter, Orifice Flowmeter, Metal float flowmeter, Ultrasonic flowmeter, Swirlmeter and some other process control instruments. Our products are widely used in water treatment, environmental protection, water conservancy, petroleum, chemical, pharmaceutical, natural gas, electricity, heating supplying, papermaking, metallurgy, scientific research, nation defense project and other fields.

Our enterprise development strategy is "People-Oriented, Quality First, Development on Technology ". We attach importance to management internally, and expanding the market externally, to focus on the business philosophy of quality products, good service, reasonable price, honest and trustworthy all along.

Our Name Chuangxin in Chinese means to innovate. Someone says Innovation is the core of the manufacturing industry, it is to master the key core technologies, which must be achieved by self-reliance and independent innovation, we strive all the time in this direction.

Keeping continuous innovating and improving to provide satisfactory products and services to our global clients.

ADVANTAGE & CERTIFICATE

SERVICES & EXHIBITION

FAQ

Q: If the flowmeter can be used to measure chemical solutions?
A: Generally they can. Meanwhile we have to confirm whether the solution is conductive or not, then we have to know the solution's composition 
and concentration and according to this can we finally confirm the what lining and electrode materials are available.
 
Q: Which industries are the flowmeter used?
A: The flowmeter is commonly used in metallurgy, petrochemical, papermaking, textile, water supply and drainage, sewage treatment, 
pharmaceutical, food, biological, fine chemical industry, etc.
 
Q: What about the quality assurance service?
A: Our guarantee period is 12 months, the product quality problem that appears in the quality assurance period, we give free maintenance or change.

Q: Are you trading company or manufacturer ?
A: We are factory and has manufactured various flowmeters over 14years.

Q: How about your delivery time?
A: Depends on the order quantity, generally it is 2~4 working days if the goods are in stock.
or it is 7-9 working days if the order quantity is with 50 sets to be produced for all processes.

Q: Could we visit your factory?
A: Certainly, we welcome all clients visit us at their convenience for further understanding each other.

Q: What is your terms of payment ?
A: Payment below US$1000, 100% in advance; Payment over US$1000 can be 30% deposit before production, and the balance settled before shippment.
 
Q: How would you deliver the shipment ?
A: Acocrding to the order quantity or customers' request, express, air, sea are avalible.