| Customization: | Available |
|---|---|
| After-sales Service: | in Time Respond with 2 Hours |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Insertion Type Electromagnetic flowmeter
The working principle of the insertion electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. When a conductor moves in a magnetic field, induced electromotive force will be generated at both ends of the conductor perpendicular to the direction of the magnetic field and the direction of motion. The electromotive force is proportional to the speed of the conductor and the magnetic induction intensity of the magnetic field.
CXLD electromagnetic flowmeter is manufactured with the latest technology of contemporary electromagnetic flow and has the following characteristics:
One advantage of an Insertion Electromagnetic Flowmeter is that it can be easily installed into existing pipelines without the need to interrupt the flow of the process. This can result in cost savings and reduced downtime during installation. Additionally, insertion flowmeters are typically more affordable than full-bore flowmeters, making them a cost-effective option for measuring flow in large pipelines. They also offer high accuracy and reliability in measuring flow rates of conductive liquids.| Pipe Diameter | DN200~DN3000mm |
| Flow Range | 0.1 ~ 10m/s |
| Precision | 0.5~10m/s : ±1.5%FS;0.1~0.5m/s: ±2.0%FS 0.1~10m/s : ±2.5%FS(FS refer to 40%-100% full scale flow) |
| Conductivity | >50μs/cm |
| Straight pipe | Upstream 5D, downstream 3D |
| Medium Temp. | -20ºC ~ +130ºC |
| Ambient Temp. | -20ºC ~ +60ºC |
| Pressure Resistance | 1.6Mpa |
| Protection Level | IP65(Integrated type) IP68(Split type) |
| Electrode Material | 316L Stainless Steel |
| Signal Output | 4-20mA; RS485; HART Protocol; MODBUS Protocol |
| Sensor Material | Stainless Steel |
| Working Principal | 220VAC, tolerance of 15% or 24 VDC, ripple ≤5% |
| Power | 6.5W |
Q: If the flowmeter can be used to measure chemical solutions?
A: Generally they can. Meanwhile we have to confirm whether the solution is conductive or not, then we have to know the solution's composition
and concentration and according to this can we finally confirm the what lining and electrode materials are available.
Q: Which industries are the flowmeter used?
A: The flowmeter is commonly used in metallurgy, petrochemical, papermaking, textile, water supply and drainage, sewage treatment,
pharmaceutical, food, biological, fine chemical industry, etc.
Q: What about the quality assurance service?
A: Our guarantee period is 12 months, the product quality problem that appears in the quality assurance period, we give free maintenance or change.
Q: Are you trading company or manufacturer ?
A: We are factory and has manufactured various flowmeters over 14years.
Q: How about your delivery time?
A: Depends on the order quantity, generally it is 2~4 working days if the goods are in stock.
or it is 7-9 working days if the order quantity is with 50 sets to be produced for all processes.
Q: Could we visit your factory?
A: Certainly, we welcome all clients visit us at their convenience for further understanding each other.
Q: What is your terms of payment ?
A: Payment below US$1000, 100% in advance; Payment over US$1000 can be 30% deposit before production, and the balance settled before shippment.
Q: How would you deliver the shipment ?
A: Acocrding to the order quantity or customers' request, express, air, sea are avalible.
){kind=link}