| Customization: | Available |
|---|---|
| After-sales Service: | in Time Respond Withiin 2 Hours |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CXLUGB Vortex Flowmeter
Vortex flow meter is developed according to the principle of Karman vortex, and is used to measure the volume flow of gas, steam or liquid, and the volume flow or mass flow of standard conditions. The differential pressure technology used, combined with isolation, shielding, filtering and other measures, overcomes the problems of poor shock resistance and small signal
data disorder of similar products, and adopts the sensor packaging technology and protective measures to ensure the reliability of the product.
Features:
| Product Name | Digital 4-20Ma output flow meter Vortex flowmeter |
| Accuracy level | 1.0; 1.5 |
| Nominal pressure | 1.6MPa, 2.5MPa, 4.0MPa and above |
| Measured medium temperature | -40--350 centigrade degree |
| Pressure loss | resistance coefficient ed is not more than 2.45. Power supply |
| Power supply | 12-24VDC |
| Explosion-proof level | Ia IIC T6 ( intrinsic safety explosion-proof)7. Output signal: voltage pulse low level is not more than 1V, high level is notless than 6V, standard current signal 4-20mA |
| Measuring Medium | Liquid, gas, steam (single-phase medium or can be considered as a single-phase medium) |
| When the dryness of saturated steam is ≥85%, it can be considered as a single-phase medium | |
| Medium Temperature | 40ºC~+200ºC; -40ºC~+280ºC; 40ºC~+350ºC |
| Medium Pressure | 1.6Mpa; 2.5Mpa; 4.0Mpa (Other pressure can be customized) |
| Accuracy | 1.0%(flange); 1.5% (insertion) |
| Measuring range Ratio | 1:10(Standard air condition as reference) 1:15(Liquid) |
| Velocity Range | Liquid: (0.4~7)m/s; Gas: (4.0~60)m/s; Steam: (5.0~70)m/s |
| Pipe Diameter Range | DN15-DN300(Flange), DN80-DN2000(Insertion), DN15-DN100(Thread), DN15-DN300(Wafer), DN15-DN100(Sanitary) |
| Material | SS304(Standard), SS316(Optional) |
| Pressure Loss Coefficient | Cd≤ 2.6 |
| Vibration Acceleration Allowed | ≤0.2g |
| Power Supply | DC24V or 3.6V battery power |
| Protection Class | IP65 |
| IEP /ATEX | II 1G / Ex ia IIC T5 Ga |
| Environmental Conditions | Ambient temperature: -40ºC~55ºC |
| Relative humidity: ≤85% | |
| Atmospheric pressure:(86~106) KPa | |
| Output Signal | Pulse frequency signal2-3000Hz, Low level≤1V, high level≥6V |
| Two-wire system 4-20mA signal(isolated output), Load≤500 |
Q: If the flowmeter can be used to measure chemical solutions?
A: Generally they can. Meanwhile we have to confirm whether the solution is conductive or not, then we have to know the solution's composition
and concentration and according to this can we finally confirm the what lining and electrode materials are available.
Q: Which industries are the flowmeter used?
A: The flowmeter is commonly used in metallurgy, petrochemical, papermaking, textile, water supply and drainage, sewage treatment,
pharmaceutical, food, biological, fine chemical industry, etc.
Q: What about the quality assurance service?
A: Our guarantee period is 12 months, the product quality problem that appears in the quality assurance period, we give free maintenance or change.
Q: Are you trading company or manufacturer ?
A: We are factory and has manufactured various flowmeters over 14years.
Q: How about your delivery time?
A: Depends on the order quantity, generally it is 2~4 working days if the goods are in stock.
or it is 7-9 working days if the order quantity is with 50 sets to be produced for all processes.
Q: Could we visit your factory?
A: Certainly, we welcome all clients visit us at their convenience for further understanding each other.
Q: What is your terms of payment ?
A: Payment below US$1000, 100% in advance; Payment over US$1000 can be 30% deposit before production, and the balance settled before shippment.
Q: How would you deliver the shipment ?
A: Acocrding to the order quantity or customers' request, express, air, sea are avalible.
){kind=link}