Insertion electromagnetic flow meter is a highly intelligent and highlyreliable flow meter developed based on Faraday's law of electromagnetic induction and using international advanced technology. It is widely used in the field of large-diameter flow meters with its very high cost performance.
Features:
1 Measurement accuracy unaffected by changes in liquid density, viscosity, temperature, pressure and conductivity.
2 The high-reliability plug-in installation method does not need to disassemble the measuring tube for the installation and maintenance of the sensor, so it is more suitable for on-site use where water cannot be cut off, and can be installed on the old pipeline on-site opening.
3 The structure is simple, the measuring tube of the electromagnetic flowmeter can be lined without lining, and the reliability is high.
4 Wide range of nominal diameter, suitable for all diameter pipes between DN150~DN3000.
5 Integrated ground electrode to achieve good grounding of the instrument.
6 The sensor adopts advanced processing technology, solid-state packaging, vibration resistance, anti-penetration, long life, so that the instrument has good measurement accuracy and stability
| Pipe Diameter |
DN150-DN3000mm |
| Flow Range |
0.1 ~ 10m/s |
| Precision |
0.5~10m/s : ±1.5%FS;0.1~0.5m/s: ±2.0%FS
0.1~10m/s : ±2.5%FS(FS refer to 40%-100% full scale flow) |
| Conductivity |
>50μs/cm |
| Straight pipe |
Before 5DN, after 3DN |
| Medium Temp. |
-20ºC ~ +130ºC |
| Ambient Temp. |
-20ºC ~ +60ºC |
| Pressure Resistance |
1.6Mpa |
| Protection Level |
IP65(Integrated type) IP68(Split type) |
| Electrode Material |
316L Stainless Steel |
| Signal Output |
4-20mA; RS485; HART Protocol; MODBUS Protocol |
| Sensor Material |
Stainless Steel |
| Working Principal |
220VAC, tolerance of 15% or 24 VDC, ripple ≤5% |
| Power |
6.5W |
Kaifeng ChuangXin Measurement and Control Instrument Co., Ltd.was established in 2009, we're professional company occupied in instruments R & D, manufacturer, sales and technical counsel. The main products are Electromagnetic Flowmeter, Vortex Flowmeter, Turbine Flowmeter, Gas mass flow meter, Orifice Flowmeter, Metal float flowmeter, Ultrasonic flowmeter, Swirlmeter and some other process control instruments.
The products are widely used in water treatment, environmental protection, water conservancy, petroleum, chemical, pharmaceutical, natural gas, electricity, heating supplying, papermaking, metallurgy, scientific research, national defense project and other fields. Our enterprise development strategy is "People-Oriented, Quality First, Development on Technology ". We attach importance to management internally, and expanding the market externally, to focus on the business philosophy of quality products, good service, reasonable price, honest and trustworthy all along. Our Name Chuangxin in Chinese means to innovate. Someone says Innovation is the core of the manufacturing industry, it is to master the key core technologies, which must be achieved by self-reliance and independent innovation, we strive all the time in this direction. Keeping continuous innovating and improving to provide satisfactory products and services to our global clients.
Q: If the flowmeter can be used to measure chemical solutions?
A: Generally they can. Meanwhile we have to confirm whether the solution is conductive or not, then we have to know the solution's composition
and concentration and according to this can we finally confirm the what lining and electrode materials are available.
Q: Which industries are the flowmeter used?
A: The flowmeter is commonly used in metallurgy, petrochemical, papermaking, textile, water supply and drainage, sewage treatment,
pharmaceutical, food, biological, fine chemical industry, etc.
Q: What about the quality assurance service?
A: Our guarantee period is 12 months, the product quality problem that appears in the quality assurance period, we give free maintenance or change.
Q: Are you trading company or manufacturer ?
A: We are factory and has manufactured various flowmeters over 14years.
Q: How about your delivery time?
A: Depends on the order quantity, generally it is 2~4 working days if the goods are in stock.
or it is 7-9 working days if the order quantity is with 50 sets to be produced for all processes.
Q: Could we visit your factory?
A: Certainly, we welcome all clients visit us at their convenience for further understanding each other.
Q: What is your terms of payment ?
A: Payment below US$1000, 100% in advance; Payment over US$1000 can be 30% deposit before production, and the balance settled before shippment.
Q: How would you deliver the shipment ?
A: Acocrding to the order quantity or customers' request, express, air, sea are avalible.
){kind=link}