| Customization: | Available |
|---|---|
| After-sales Service: | in Time Response Within 2 Hours |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LGV Cone flowmeter
The LGV Cone flowmeter is a new type differential pressure flow measurement device which takes a coaxial installed pointed cone in the measuring tube as the throttling part.
And it is a new type throttling device based on the measurement principle of venturi tube and integrating the advantages of classic venturi tube, annular orifice plate and wear-resistant orifice plate.
The upstream and downstream straight pipe segments must be shorter: the minimum length of the upstream and downstream straight pipe segment requirement: the least length is 3D (3D is required installed at the downstream of a valve)
Accuracy :±0.5%; Repeatability is 0.1%; range ratio reaches 15:1.
Dirt resistant, small pressure loss.
It has flow adjustment and mixing effect on fluid.
Easy to install - ideal flowmeter for technical transformation;
Maintenance-free, minimal workload.
|
Measuring Medium |
Liquid, gas, steam (single-phase medium or can be considered as a single-phase medium) |
|
When the dryness of saturated steam is ≥85%, it can be considered as a single-phase medium |
|
|
Medium Temperature |
40~+200; -40~+280; 40~+350 |
|
Medium Pressure |
1.6Mpa; 2.5Mpa; 4.0Mpa (Other pressure can be customized) |
|
Accuracy |
1.0%(flange); 1.5% (insertion) |
|
Measuring range Ratio |
1:10(Standard air condition as reference) 1:15(Liquid) |
|
Velocity Range |
Liquid: (0.4~7)m/s; Gas: (4.0~60)m/s; Steam: (5.0~70)m/s |
|
Pipe Diameter Range |
DN15-DN300(Flange), DN80-DN2000(Insertion), DN15-DN100(Thread), DN15-DN300(Wafer), DN15-DN100(Sanitary) |
|
Material |
SS304(Standard), SS316(Optional) |
|
Pressure Loss Coefficient |
Cd≤ 2.6 |
|
Vibration Acceleration Allowed |
≤0.2g |
|
Power Supply |
DC24V or 3.6V battery power |
|
Protection Class |
IP65 |
|
IEP /ATEX |
II 1G / Ex ia IIC T5 Ga |
|
Environmental Conditions |
Ambient temperature: -40~55 |
|
Relative humidity: ≤85% |
|
|
Atmospheric pressure:(86~106) KPa |
|
|
Output Signal |
Pulse frequency signal2-3000Hz, Low level≤1V, high level≥6V |
|
Two-wire system 4-20mA signal(isolated output), Load≤500 |
Standard Export Plywood Case/ Paper Carton
Our enterprise development strategy is "People-Oriented, Quality First, Development on Technology ". We attach importance to management internally, and expanding the market externally, to focus on the business philosophy of quality products, good service, reasonable price, honest and trustworthy all along.
Our Name Chuangxin in Chinese means to innovate. Someone says Innovation is the core of the manufacturing industry, it is to master the key core technologies, which must be achieved by self-reliance and independent innovation, we strive all the time in this direction.
Keeping continuous innovating and improving to provide satisfactory products and services to our global clients.
We can provide ODM, OEM Service
Tell us your application conditon, we'll give advice in choosing suitable product
Standard production and on-time delivery
Field installation and commissioning guide is available
In time After-sales service
Q: If the Electromagnetic flowmeter can be used to measure chemical solutions?
A: Generally they can. Meanwhile we have to confirm whether the solution is conductive or not, then we have to know the solution's composition and concentration and according to this can we finally confirm the what lining and electrode materials are available.
Q: Which industries are the electromagnetic flowmeter used?
A: Electromagnetic flowmeter is commonly used in metallurgy, petrochemical, papermaking, textile, water supply and drainage, sewage treatment, pharmaceutical, food, biological, fine chemical industry, etc.
Q: What about the quality assurance service?
A: Our guarantee period is 12 months, the product quality problem that appears in the quality assurance period, we give free maintenance or change.
Q: Are you trading company or manufacturer ?
A: We are factory and has manufacture kinds of flowmeter for more than 14years.
Q: How about your delivery time?
A: Depends on the order quantity, generally it is 2-4 working days if the goods are in stock.
or it is 7-9 working days if the order quantity is with 50 sets to be produced for all processes.
Q: Could we visit your factory?
A: Certainly, we welcome all clients visit us at their convenience for further understanding each other.
Q: What is your terms of payment ?
A: Payment below US$1000, 100% in advance; Payment over US$1000 can be 30% deposit before production, and the balance settled before shippment.
Q: How would you deliver the shipment ?
A: Acocrding to the order quantity or customers' request, express, air, sea are avalible.
){kind=link}