| Customization: | Available |
|---|---|
| After-sales Service: | in Time Response Within 2 Hours |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Insertion mag flowmeter magnetic electromagnetic flow meter is a kind of fluid flow instrument developed on the basis of inline type electromagnetic flowmeter. So an insertion flow meter also can be regards as one of electromagnetic flow meter, though it is defined as a meter that measures flow at a point in a pipe fulled of liquid , then uses that measurement to determine the average flow through the pipe and then confirm the whole flow of the pipe in some period.
In practice, sometimes, it is difficult to install flanged inline type Magnetic Flow Meter on large pipelines, and the installation cost and transportation fee is very high.
Insertion Magnetic Flow Meter takes measurement fluids velocity in a specific area of the pipe line, which will represent the whole pipeline fluids flow rate. Insertion type Electromagnetic Flow Meter is also based on Faraday's Induction Law and has many wide applications in lot industries.
The electromagnetic method is used to measure the uniformity of fluid, and then calculate the flow rate of the whole pipeline. The Insertion Mag Flow sensor can be installed without cutting off or stop the whole pipeline, magnetic flow sensor can also be installed on cast iron pipes and cement pipes. Insertion Magnetic Flow Meter is cheap and economical solution to detect liquid conductive flow on large pipeline, however the accuracy is not as good as flanged inline magnetic flow meter.
Working principle
Electromagnetic flow meters are flowmeters that measure flow according to Faraday's law of electromagnetic induction. Electromagnetic flowmeters have the advantage of minimal pressure loss and a large range of measurable flow rates. The ratio of the maximum flow rate to the minimum flow rate is generally more than 20:1. The applicable industrial tube diameter is wide, up to 3 meters. The output signal and the measured flow rate are linear, and the accuracy is high. The conductivity can be measured ≥5μs/cm. Acid, alkali, salt solution, water, sewage, corrosive liquids, and fluid flow of mud, pulp, pulp, etc. However, it cannot measure the flow of gas, steam, and pure water.
Product details
Insertion mag flowmeter magnetic electromagnetic flow meter features:
1. Simple and reliable structure
2. Fast response and good stability
3. Strong anti-interference ability
4. No moving parts, long working life
5 .With self-test and self-diagnosis function
6. Measurement stability with low power loss
7. Fast operation speed and high calculation accuracy
Product advantages
1. Easy to install
2. Save costs
3.Can be installed online without stopping water
|
Name |
Electromagnetic Flowmeter |
||
|
Model |
CXLD |
||
|
Nominal diameter |
DN150-3000mm |
||
|
Velocity range |
0-10m/s |
||
|
Degree of accuracy |
±1%R,±1.5%R, |
||
|
Medium conductivity |
≥5μS/cm,Actual conductivity≥20μS/cm |
||
|
Nominal pressure(hight press)
|
0.6MPa |
1.0Mpa |
1.6MPa
|
|
DN700-DN3000 |
DN200-DN1000 |
DN150-DN600 |
|
|
Ambient Temperature Ranges |
fission -10~+60 |
||
|
Lining Material |
Chloroprene rubber (CR),80 Polyurethane(PU),80 |
||
|
Electrode Material |
316L Stainless Steel, Hastelloy C, Ti, Ta, Pt |
||
|
Output signal |
Current (4-20 mA) , pulse , frequency |
||
|
Serial communications |
RS-485, support standard Mudbus protocol; GPRS |
||
|
Flange standard |
GB, ANSI150, DIN |
||
|
Power supply |
220VAC/24VDC/Lithium battery |
||
|
Protection class |
IP65/IP67/IP68 |
||
|
Electirical interface |
M20*1.5 Intemal thread(NPT thread is optional) |
||
){kind=link}